Sound speakers installation – tips from experts


If you want to enjoy your music or videos in a very attractive, refined manner, a very good idea is to opt for a surround speaker system. However, installing this type of unit can be rather challenging, which is why we are here to help. With that in mind, we created a list that will help you set up your surround
system in no time!

  1. Place the subwoofer near the center of your home theater and tilt the front speaker towards the audience.
    Yes, the first thing you have to do after you unbox your surround sound speaker system is to put the subwoofer in the center. You need this for the optimal experience. The good idea is to place the front speakers at this time too, but try to tilt them towards the audience. This is the best way to achieve amazing results with your audio, and it does pay off very well.
  2. Put the central channel speaker above or below the TV.
    Then you can add the central channel speaker. Depending on the model you have, you can either place it above or below your TV station. Usually, it will go below the TV, but there are models that need to be placed above the TV.
  3. Add the surround channel speakers to the side of your viewing area.
    This is a pivotal step because side speakers will be crucial during intense action sequences and musical pieces. The side speakers are important for delivering the immersion factor, so you need to point them directly at the viewer.
  4. Raise the surround channel speakers.
    Why do you have to raise the surround speakers? The idea is simple – you will need to raise them 2 feet above the ear levels because this will allow viewers to get immersed into the action without having to deal with any ear damage from too much noise.
  5. Put the back channel speakers behind the viewing area.
    Then, you have to place the back channel speaker behind the viewer. This will be the ultimate piece, and it will help create a bubble of sound for the viewer. Obviously, this doesn’t deliver as much performance when compared to the other pieces, but it’s still very important for the entire system.
  6. Connect the speakers
    You need to put the receiver near your TV, but make sure that you power everything off. Connect all speakers to the central unit; each one will have its dedicated wire. It’s a good idea to run the wires through the wall or under the carpet so you can deliver a clean look! Connect the speakers and subwoofer; then everything should be ok!
  7. Connect the equipment.
    Lastly, you will need to connect the equipment. You first have to connect the HDMI devices to the receiver at this point. Also, plug in the component devices to the receiver, as that is equally as important. If you have any composite devices, you will have to connect those as well. The last step will require you to connect the receiver to the TV and power the unit to test it out. Of course, you can try to organize cables if necessary, especially if you don’t have a large apartment!

Overall, installing surround sound speaker systems is not that hard. If you follow these instructions, you will be able to do that in no time. You should consider giving this guideline a shot, as it will help make the installation process a lot faster and easier!